Certifications & Accreditations

 FAA Repair Station and NADCAP Approved

DCI Aerotech is Nadcap approved for Chemical Processing, Non Destructive Testing, Surface Enhancement, Conventional Machining as a processes-ID/OD grinding services. HVOF Coatings and the AC7004 Quality System.

DCI is categorized as FAA Repair Station D77R737Y.

Download our E-brochure which lists all of our Certifications & Accreditations

WE ARE APPROVED FOR PROCESSING BY THE FOLLOWING PRIME CONTRACTORS:

AAR Cargo Ares BAE
Beaver Aerospace & Defense Boeing Curtiss-Wright
Crane Lear Romec Danaher Linear Motion (Thomson Saginaw)
Eaton GE Aircraft Global Tooling
Goodrich Cargo Hamilton Sundstrand HR Textron
Johnson Technology Liebherr Lockheed Martin
Lycoming Pratt & Whitney Moog
Parker Rolls-Royce CA Rolls-Royce UK
Rolls-Royce US Raytheon Roush
Siemens Stryker SPX Fluid Power
Vickers Williams International Woodward MPC
Heroux Devtek Bombardier Safran

Nadcap Plating Approvals

Hard ChromeThin Dense ChromeCadmiumElectroless NickelSulfamate NickelGoldSilverCopperLeadTinZincIndium
Nadcap FAA Repair StationXXXXXXXXXXXX
FAA RepairXXXXXXXXXXXX
AAR CargoXXXXXXXXXXX
Goodrich CargoXXXXXXXXXXXX
BoeingXXXX
Curtiss WrightXXXXX
EatonXXXXXXXXXXXX
GE AircraftXXX*XXXX
Global ToolingXX
Hamilton SundstrandXXXXXXXXXXX
Heroux DevtekXXXXX
Lockheed MartinX
LycomingXXX
MoogXXXXX
ParkerXXXX
Rolls Royce CAXXXXXXX
Rolls Royce UKXXXXXXX
Rolls Royce USXXXXXXX
VickersXXXXX
Williams InternationalXXXXXXXXXXX

Nadcap Alloy Plating Approvals

BronzeNickel Cadmium DiffusedTi-CadLead Indium DiffusedLead TinZinc NickelShot Peen
NadcapXXXXXXX
FAA Repair StationXXXXXXX
AAR Cargo
Goodrich CargoXXXXXXX
Boeing
Curtiss Wright
EatonXXXXXXX
GE Aircraft
Hamilton SundstrandXXX
Heroux DevtekXX
HR Textron
LiebherrX
Lycoming
MoogXX
ParkerX
Rolls Royce UKX
Rolls Royce USX
VickersX
Williams InternationalXXXX

Nadcap Nondestructive Testing Approvals

Magnetic Particle InspectionLiquid Penetrant InspectionTemper Etch InspectionPre-Penetrant EtchPassivation
NadcapXXXXX
FAA Repair StationXXXX
AAR CargoXXX
Goodrich CargoXXXXX
Curtiss WrightXX
EatonXXXXX
GE AircraftX*X*
Hamilton SundstrandXXXXX
Heroux DevtekXXXX
MoogXXXX
LiebherrXXX
Lockheed MartinX
LycomingXXX
ParkerXXX
Rolls Royce UKX
Rolls Royce USApproval PendingApproval PendingApproval PendingX
Siemens, FLX*
VickersXXX
Williams InternationalXXXXX

Nadcap Surface Coatings Approvals

Prime & PaintDry Film LubeEnamel CoatingChemical Conversion CoatingManganese PhosphateZinc PhosphateHeavy Zinc PhosphateTitanium Fluoride PhosphateBlack Oxide
NadcapXXXXXXXXX
FAA Repair StationXXXXXX
AAR CargoXXXXX
Goodrich CargoXXXXXXXXX
Boeing
Curtiss WrightX
EatonXXXXXXXXX
GE AircraftX
Hamilton SundstrandXXX
Heroux DevtekXX
HR Textron
Lockheed MartinX
MoogXX
Rolls Royce CAX
Rolls Royce UKXXXXX
Rolls Royce USX
VickersXXX
Williams InternationalXXXXXXXXX

MOOG Approved Special Process Suppliers

Approved Special - Process Suppliers - United Kingdom
AMS 2424
ASTM E1417
MIL-PRF-23377
SAE-AMS2649
SBC00
AMS-A-8625
ASTM E1444
MIL-STD-867
SAE-AMS-QQ-P-35
SQR-1
AMS-QQ-P-416
EP3647
QQ-C-320
SAE-AMS-QQ-P-416
ASTM 967
MIL-PRF-22750
QQ-P-416
SAE-AMS-S-13165

Boeing Approved Process Sources D1-4426 for 715437

Processor Code NumberProcess CodeNadcap CommodityLimitation CodesDoc NotesNomenclatureSpecification Number
7154371AQSNoneNoneProcessor Basic Quality System for D1-4426 approval onlyQuality System
350CPNoneNoneChromium-PlatingQQ-C-320
350BCPNoneNoneChromium Plating (Electrodeposited)AMS-QQ-C-320
351CPNoneTank #1 OnlyHard Chromium Plating - Class 1 and 2BAC 5709
353CPNoneTank #1 OnlyHard Chromium Plating - Class 4 (QPL)BAC 5709
355CPNoneNoneCopper PlatingMIL-C-14550
366CPNoneClasses 1 - 2Electroless Nickel CoatingsMIL-C-26074
802MTLA3Bend Testing OnlyMechanical Testing - MetallicMech. Testing
803MTLA3Microhardness onlyMetallurgical TestingMet. Testing
809CPA3NoneProcess Solution ControlChem. Testing
810CPA3NoneSalt Spray TestingASTM-B-117

GE Transportation Aviation Special Process Certification

SupplierAE Supplier CodeCode - Name of ProcessCategorySupplier Tech. Rep.Specification Approvals
Detroit Chrome Elect FOBT2986DK- Stripping/Leeching2Approved for Chemical Stripping or Leaching (DK00) per P4-TE20, P4TF5, MIL-STD-871.
DB - Plating2Approved for Bronze Plating (DB09) per AMS-2429;
Chromium Plating (DB01) per AMS-2406, QQ-C-320;
Copper Plating (DB07) per AMS-2418;
Nickel Plating (DB02) per AMS 2403;
Electroless-Nickel Plating (DB03) per AMS-2404;
Silver Plating (DB05) per AMS-2410, 2412; QQ-S-365; S-414.
DO - Coating Black Oxide2Approved for Black Oxide Conversion Coating (DO-00) per MIL-DTL-13924; AMS 2485; S-414.

Nadcap-Cert Numbers-Expiration Dates

In accordance with SAE Aerospace Standard AS7003, to the revision in effect at the time of the audit, this certificate is granted and awarded by the authority of the Nadcap Management Council to: DCI Aerotech Div. of Detroit Chrome Inc.NACAP CERTSCertificate NumberExpiration Date
Chemical Processing361613909831-Jul-15
NonDestructive Testing361614041330-Apr-15
Aerospace Quality System (AC7004)361613909731-Jan-15
Surface Enhancement361614609131-Oct-14
Coatings361615371131-Jan-15
Conventional Machining as a Special Process361615330631-Jan-15

Rolls-Royce Cert of Approval

Scope of Approval:
AMS 2400
AMS 2403
AMS 2404
AMS 2405
AMS 2406
AMS 2410
AMS 2411
AMS 2412
AMS 2416
AMS 2418
AMS 2424
AMS 2438
AMS 2485
AMS-QQ-C-320
AMS-QQ-N-290
AMS-QQ-P-35
AMS-QQ-P-416
AMS-QQ-Z-325
ASTM A 380
ASTM B 633
ASTM B 650
MIL-C-13924
MIL-C-26074
MSRR 9274
RPS 168
RPS 278
RPS 297
RPS 661/2, /9 & /15
Paint / Dry Film other (to AMS - via RR Corporation)
Acid / Alkaline / Emulsion / Aqueous / Solvent cleaning (to AMS - via R-R Corportation)
Rolls-Royce Corporation Sub Tier Supplier (RRU6)
RPS 6
RPS 26
RPS 55
RPS 128
RPS 130
RPS 147
RPS 170
RPS 237
RPS 297
RPS 367
RPS 386
RPS 449
RPS 461
RPS 576
RPS 709

Nadcap Scope of Accreditation Non Destructive Testing

In recognition of the successful completion of the PRI evaluation process, accreditation is granted to this facility to perform the following:
AC7114 Rev E - Nadcap Audit Criteria for NonDestructive Testing (NDT) Suppliers
Accreditation Program
AC7114/1 Rev E - Nadcap Audit Criteria for NonDestructive Testing Facility
Penetrant Survey
AC7114/2 Rev E - Nadcap Audit Criteria for NonDestructive Testing Magnetic
Particle Survey

AC7108/1 Rev A – Nadcap Audit Criteria for Painting & Dry Film Coatings

DOD-P-15328
Dry Film Coatings - Other
MIL-C-22750
MIL-C-46168
MIL-C-53039
MIL-C-8514
MIL-C-85285
MIL-DTL-53022
MIL-DTL-53030
MIL-DTL-53039
MIL-L-46010
MIL-P-23377
MIL-PRF-22750
MIL-PRF-23377
MIL-PRF-85285
MIL-PRF-85582
Paint - Other
Paint/Dry Film Coatings-Other

AC7108/2 Rev B – Nadcap Audit Criteria for Etch Processes (Blue Etch Anodize, Local, Macrostructure, Nital, Pre-Penetrant, Temper)

AMS 2643
AMS 2649
Etching - Other
Local (Swab) Etch
MIL-STD-867
Macrostructure Etch
Nital Etch
Pre-Penetrant Etch
Solution Analysis Performed On Site in Support of Etch Processes
Temper Etch

AC7108 Rev D – Nadcap Audit Criteria for Chemical Processing

Alloy Plating – AMS 2415
Alloy Plating – AMS 2416
Alloy Plating – AMS 2417
Alloy Plating – AMS-P-81728
Alloy Plating – MIL-P-81728
Alloy Plating – MIL-STD-1500
Alloy Plating – Other
Alpha Case Removal (This addresses the removal process only and not the evaluation process)
Anodizing – Other
Brush Plating – Other
Cadmium Plating – AMS 2400
Cadmium Plating – AMS 2401
Cadmium Plating – AMS 2419
Cadmium Plating – AMS-QQ-P-416
Cadmium Plating – MIL-STD-870
Cadmium Plating – Other
Cadmium Plating – QQ-P-416
Chemical Cleaning – ASTM B600
Chemical Cleaning – Acid Cleaning (If Titanium Acid Cleaning is also carried out then please check "Chemical Cleaning-Titanium Cleaning - Acid" also)
Chemical Cleaning – Alkaline Cleaning (If Titanium Alkaline Cleaning is also carried out then pleaes check "Chemical Cleaning - Titanium Cleaning - Alkaline" also)
Chemical Cleaning – Emulsion Cleaning
Chemical Cleaning – Other
Chemical Cleaning – Semi-Aqueous Cleaning
Chemical Cleaning – Solvent Cleaning
Chemical Cleaning – Titanium Cleaning – Alkaline
Chromium Plating – AMS 2406
Chromium Plating – AMS 2438
Chromium Plating – AMS 2460
Chromium Plating – ASTM B 650
Chromium Plating – MIL-STD-1501
Chromium Plating – Other
Chromium Plating –AMS-QQ-C-320
Chromium Plating –QQ-C-320
Conversion/Phosphate Coatings – AMS 2480
Conversion/Phosphate Coatings – AMS 2481
Conversion/Phosphate Coatings – AMS 2485
Conversion/Phosphate Coatings – AMS 2486
Conversion/Phosphate Coatings – DOD-P-16232
Conversion/Phosphate Coatings – MIL-C-13924
Conversion/Phosphate Coatings – MIL-C-5541
Conversion/Phosphate Coatings – MIL-DTL-13924
Conversion/Phosphate Coatings – MIL-DTL-16232
Conversion/Phosphate Coatings – MIL-DTL-5541
Conversion/Phosphate Coatings – Other
Conversion/Phosphate Coatings – TT-C-490
Copper Plating – AMS 2418
Copper Plating – MIL-C-14550
Copper Plating – Other
Electroless Plating Nickel – AMS 2404
Electroless Plating Nickel – AMS 2405
Electroless Plating Nickel – AMS-C-26074
Electroless Plating Nickel – MIL-C-26074
Electroless Plating Nickel – Other
Electropolishing – Other
Etch (AC7108/2 MUST ALSO BE SELECTED)
Gold Plating – AMS 2422
Gold Plating – AMS 2425
Gold Plating – MIL-G-45204
Gold Plating – Other
Gold Plating-ASTM B 488
Lead Plating – AMS 2414
Lead Plating – MIL-L-13808
Lead Plating – Other
Nickel Plating – AMS 2403
Nickel Plating – AMS 2423
Nickel Plating – AMS 2424
Nickel Plating – AMS-QQ-N-290
Nickel Plating – Other
Nickel Plating – QQ-N-290
Paint/Dry Film (AC7108/1 MUST ALSO BE SELECTED)
Silver Plating – AMS 2410
Silver Plating – AMS 2411
Silver Plating – AMS 2412
Silver Plating – ASTM B 700
Silver Plating – Other
Silver Plating – QQ-S-365
Surface Treatment/Passivation – ASTM A 380
Surface Treatment/Passivation – ASTM A 967
Surface Treatment/Passivation – Other
Surface Treatment/Passivation – QQ-P-35
Surface Treatment/Passivation– AMS-2700
Surface Treatment/Passivation– AMS-QQ-P-35
TESTING PERFORMED INTERNALLY IN SUPPORT OF CHEMICAL PROCESSING IN THE SCOPEOF THE AUDIT. (DO NOT CHECK TESTS THAT ARE OUTSOURCED)
B10 Adhesion Tape Testing
B11 Adhesion Scratch and Chisel Testing
B12 Adhesion Bend Testing (Metallic Coatings)
B13 Coating Weight Testing
B16 Thickness Verification of Magnetic, Eddy Current and XRF Machines
B18 Adhesion Testing Heat and Quench
B20 Porosity
B21 Other Test Method
B3 Metallography Testing
B4 Microhardness Testing
B5 Corrosion/Salt Spray Testing
B6 Water Immersion/High Humidity Testing
B7 Heat Resistance Testing
Solution Analysis
Tin Plating – AMS 2408
Tin Plating – AMS 2409
Tin Plating – ASTM B 339
Tin Plating – ASTM B 545
Tin Plating – MIL-T-10727
Tin Plating – Other
Zinc Plating – AMS 2402
Zinc Plating – AMS 2420
Zinc Plating – ASTM B 633
Zinc Plating – Other
Zinc Plating – QQ-Z-325